How To Use Multiply In Photoshop

Download Article

Merging two or more different pictures allows you to create beautiful graphics in a multitude of fields within the image. Photoshop lets yous create special furnishings, but in this instance, you'll just get acquainted with how to mix two images in a harmonious style to create a synergistic, uncomplicated blend.

1
Select the images for your composition, and so open up them both in the same window. To practice and so, y'all accept several options. The easiest is to click and elevate the images into Photoshop straight from your Desktop, Finder, or Windows Explorer window. However, you lot could also:
- Click "File" → "Open." This will open up two split up tabs above your image. Click and drag a tab to pull it out of the frame. Then click and drag the epitome to the tab you lot want both photos in.
2
Adjust the size of each layer, if need exist, with the Transform Tool. This powerful feature lets you re-size, rotate, angle, and adjust an prototype's size. To use it, click on the layer y'all want and press either Ctrl+T (PC) or Cmd-T (Mac) to offset transforming. Yous'll see a box with little handles that permit you accommodate things.
- Hold Shift when re-sizing to proceed the aforementioned dimensions.
- Hold Ctrl/Cmd when re-sizing to only motility the point you're clicking on, creating "perspective."
- Hold Alt/Opt when re-sizing to continue all the angles of the image the same (the corners), but change the size.
- Click merely outside the edges of the image to rotate it.^[ane]
Advertisement
iii
Use the Eraser tool to cutting away any not-essential areas. If yous know you definitely don't desire something, pull upwardly your Eraser (Due east) and commencement hacking away. While working, hither are some helpful hints:
- Hit Ctrl-Alt-Z (PC) or Cmd-Opt-Z (Mac) to undo any accidental erasing. Striking Ctrl-Z or Cmd-Z to redo it if yous get back too far.^[2]
- If you create a option (the moving, dotted line) then you tin can simply erase what is in the option. This is a expert way to protect areas you can't erase, by merely selecting areas y'all need to erase from.
- Erasing is permanent, meaning the pixel data is lost. At that place are steps below that let you make pixels invisible instead, saving them if you lot demand them later.
4
Utilise layer masks to erase non-permanently, likewise equally "gradually" erase images into each other. Layer masks are you best friend when merging. They let you to erase parts of a layer without actually deleting the data, significant you can easily undo information technology all if you mess up. To brand one, highlight the layer you want, so click the small rectangle icon with a blackness circle in the center at the lesser of the layer'due south pallet. From here:
- Plough on the brush tool. Information technology will automatically be set to black and white.
- Make sure your layer mask is selected. It is the second, all white foursquare to the correct of your layer.
- Color in anything you desire to exist erased in black on the bodily prototype. Information technology will erase, not add black ink.
- Anything colored in grey volition partially erase, up until it is fully blackness or white.
- Re-color the mask with white to brand the image reappear.
- Note that you lot can utilize gradients, weird brushes, stamps, and the pen tool likewise! Whatever way you lot "color" the mask will show upwardly.^[3] ^[4]
5
Use your selection tools and "Refine Edge" to isolate specific things in your prototype" If yous just desire to pull a person into an image, or Photoshop a flag from 1 photo into the background of another, then merging the images may non be necessary. Instead, use the following tools to select your object, then right-click and cull "New Layer Via Cut."^[5]
- Shaped Selections: The icon looks like a dotted box, and is first up. If you click and concord the icon information technology exposes more shapes to apply.
- Lasso Tools: Click create a pick, finishing when you connect the two ends of you line or click again to finish it. At that place are also options for angular and "magnetic" (post-obit colors) lassos.
- Quick Selection Tool: Resembles a paintbrush with a small dotted line around the end of the brush. This is your near powerful tool. Click and drag it on an prototype and it will attempt to detect and select the object automatically. Change the tolerance, shown above, for ameliorate results.
- Magic Wand: Click and concord to find it behind the Quick Selection tool, or vice versa. The Wand selects all pixels in the same color range as the place you just clicked, which helps remove large swaths of background all at in one case.
- Pen Tool: Icon looks like a regular fountain pen. This is the most powerful tool you've got, just also the nigh time consuming to use. The pen tool creates "paths" with anchor points that can b be adapted on the fly, giving yous more control than basic selections.

1

Change the opacity of your brushes and erasers for tighter control. Partial transparencies also stack, meaning you can apply this to "shade in" images realistically. If you need a partial edge or gentle transition, gear up the brush or eraser opacity to 10% or and so. At present, every time you shade over that area, you erase 10% of pixels each time. So, if you lot erase it 10 times in one area, so move over and erase 8 times, so 6, etc, you would become a nice, gradual merge.
2
Employ "Refine Edge" to become perfect cuts and selections. Establish through "Selection" → "Refine Border," this shows off what your image volition look like without a background. This allows y'all to run into your new photo perfectly, fine tuning it before merging it in. Any selection, on whatever layer, can be refined. When done, click "Selection" → "Changed" and hitting the Delete key to erase all the pixels you refined out.
- Radius: Shrinks the edge all the fashion around. Each pixel you lot "add together" cuts a pixel closer to your selection.
- Shine: Rounds the edges
- Feather: Adds fractional transparent "blur" to the edge of the selection.
- Dissimilarity: Makes harder edges and points. Opposite of "Smooth."
- Shift Edge: Grows or shrinks the entire thing based on the percentage you supply.^[6]
3
Attempt the "Auto-Align Layers" if you're matching near-identical photos. This characteristic will sync up the two images, similar a group photo where 1 person closed their optics. Pull in another re-create where they have their eyes open, then select both layers past Ctrl/Cmd-clicking them. From there, select "Edit" → "Auto-Align Layers."
- Select "Reposition But" for the best results.^[7]
iv
Play with "Blending Modes" to match the lighting in your merged images. Blending modes relate one layer to another. So, for instance, if your bottom layer has strong lighting, y'all can tell your tiptop layer to take some of these light pixels and use them to lighten upwardly your tiptop layer. Sound confusing? The best role is, it is unproblematic and easy to experiment without permanent damages. To apply them:
- Click on the height layer of the ones you're merging.
- Click on the drop-downwards menu, currently set to "Normal" above the layers.
- Choose a new blending mode, noting how it changes your image. Try out
  - Pin Light
  - Lighten
  - Multiply
  - Overlay
  - Soft Calorie-free
  - Dissolve^[viii]

Advertising

Add New Question

Question

Can you merge photographs of people?

Crystal Bear is a Professional person Lensman and the Owner of Summer Conduct Photography. Crystal specializes in weddings and portraits for women. She holds a BS in Interior Pattern and Consumer Scientific discipline from San Francisco State Academy. Coming from a design background, Crystal brings a sense of style and artistry to her work that brings out her client'due south inner conviction, showcases their beauty both inside and out, and puts them at ease. She besides specializes in using the correct lighting and branding for women entrepreneurs.

Professional Lensman

Good Answer

Ask a Question

200 characters left

Include your email address to become a message when this question is answered.

Submit

wikiHow Video: How to Merge Photos Using Photoshop

About This Article

Commodity Summary X

Y'all can use Adobe Photoshop to artfully alloy and merge two photos into one. First, open up both images in Photoshop—to open each image, click the "File" menu in Photoshop, click "Open", and select the photo. Then, click "Open," and and so do the aforementioned for the second photo. Now you'll need to get both photos onto the same sail. To do this, click the tab of the base of operations image, or bottom image, to open up it. Yous'll see some other tab at the top that contains the proper noun of the 2d image—drag that tab to the center of the base image to add it equally a 2d layer. If y'all demand to adjust the size of the top image, you can use the Free Transform tool. To apply information technology, click the top image in the Layers console, and so press Control + T on a PC, or Command + T on a Mac. Agree downwardly the Shift key as y'all drag the handles inward or outward and then you lot don't warp the epitome. Now, add a layer mask to gradually alloy the images together. Starting time by selecting the top layer in the Layers panel, and then click the small rectangle icon with a black circle at its heart. Now press the G key to open the gradient tool. Make sure the foreground color is black and the background color is white, so choose a gradient pattern from the drop-down menu. Drag the gradient anywhere on the paradigm to blend the layers in the slope blueprint. You lot tin also apply the castor tool to blend things manually. With this tool, anywhere you lot paint with black, the background image will evidence through more strongly. You can adjust the castor'south opacity past selecting a different percentage from the Opacity drop-down. You may as well want to check out Blending Options. Select the top layer in the Layers panel, and and then cull a blending option from the driblet-down carte du jour, which should be set to "Normal" or "Screen" past default. There are many options to choose from, but try the "Overlay" selection to conform the colors of the superlative layer based on the bottom layer, or "Soft Light" for a diffused spotlight expect. When you lot're happy with your paradigm, select the "Layer" bill of fare and click "Flatten" to flatten the layers, so save your file in the desired format.

Did this summary help you?

Thank you to all authors for creating a page that has been read 679,479 times.